The characteristics of logistics warehouses and factory warehouses are large total area, larger volume, poor ventilation, long-term accumulation of goods, and more objects, which will block the natural ventilation of the production workshop. Without ventilation, it is obvious that summer temperatures will be higher, and workers will load and unload goods The agency situation will occur, which will cause great harm to the physical and mental health of employees. The key point is to prevent infectious diseases. The warehouse room is not ventilated and extremely dry. It is very easy to cause fire accidents. How to prevent it? If the steel frame structure of tinplate is selected, because the solar penetrating power is strong and heat is accumulated, the environmental pollution problem is even more lost. For this natural environment, the ventilation and cooling solution is improved:

I: Environmentally Friendly Air Conditioning Solution

1. Find a suitable quantity of environmentally friendly air conditioners. The quantity is calculated based on the total area of your plant (measured according to 1 unit / 150 square meters). This method requires that the load-bearing beam or roof of the plant has a certain load capacity. The average value of a cooler + water storage tank is about 85kg.

2. Make holes in the wall / roof. The size of the holes must be in accordance with the specifications of the ventilation duct (exactly).

3. To install the air cooler, multiple workers must cooperate with each other. Finally, the stationary air cooler must be fixed with a support frame.

4. Install the exhaust air ducts according to the design plan of your pipelines. If the total area of the plant is relatively large, it is best to carry out job ventilation, which can save assets. Spread the ventilation ducts where you want to cool down.

5, the effective design of the total number of exhaust air outlets, the average spacing of 1-2m.

6. In the end, it should be said that if there is no time and vitality, it is best to find a technical professional enterprise to install to prevent blindness. In addition, make your own cooling plan more reasonable, and spend the same money, the actual effect varies from person to person.

2: Cooling generator set program

This type of scheme is very similar to the air cooler, the difference is that the air cooler is installed on the load-bearing beam or roof, and the generator set is generally larger. It is applicable to these because the inability to use indoor space or the load-bearing beam can not bear the load There are also companies that require cold and hot dual-use air conditioners. The basic principles of these two schemes are the same, and the principle of the equipment is the same. It is just that the total controllable area of the generator set is reasonably large, generally 1 unit / 400㎡ or larger.

It is usually placed on the road or on a solid and solid block.

Three: Fan + cooling water curtain wall plan

This type of scheme is generally more environmentally friendly and energy-saving. However, there are high standards for the factory building. The first factory building must have a load-bearing beam that can be placed with a cooling water curtain wall. Yes, general greenhouses and breeding plants will use such a scheme later, because once installed, it will endanger the structure of the wall.

The left and right solutions are all solutions that can actually reduce the temperature, that is, accurate measurement with a thermometer has the expected effect.

Four: negative pressure fan program

The principle of this solution is to exhaust the gas containing high temperature, odor and dust in the room, and change the outdoor gas of course. The benefit is that it has the actual effect of ventilation and exhaust pipes. The ventilation also contains the actual effect of cooling. However, the temperature is the same as the outdoor temperature. The smoke fan is also around 1,000 yuan.

Five: Industrial Fan Solution

This solution is a solution with relatively low operating costs. Nowadays, there are industrial fans with super large exhaust volume and extremely low speed ratio on the market, with a power of 1.1-1.5kw, and an extra large coverage area (1500 square meters per unit). Electric fans, but this is a solution for somatosensory game cooling. Due to the gas mobility promoted by the wind, it accelerates the evaporation of human sweat. Therefore, companies that want to save costs and expenses for the total area of large factories are the best choice.